Digium Wildcard TE207P

Digium Dual Span with Echo Cancellation Card for Asterisk™
Supports Both E1/T1 in one single card.

The TE207P offers an on-board DSP-based echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis.

The VPM450M echo cancellation module provides a certified carrier-grade algorithm that has been labeled a benchmark for echo cancellation. The new VPM450M enables users to eliminate echo tails up to 128ms or 1024 taps across all 128 channels in E1 mode or 96 channels in T1/J1 modes. Further, this module takes advantage of the Octasic Voice Quality Enhancement to provide superior sound quality on all calls.

The TE207P supports a 5.0v PCI slot only. If you are unsure about the PCI slots on your motherboard, please click the following link on Digium site.
Will the TE207 fit in my PCI slot?

Feature List

Provide Toll Quality voice over IP Network

Technical Specifications

Eliminate echo tails up to 128ms or 1024 taps across all 128 channels in E1 mode or 96 channels in T1/J1 modes

Physical Specifications

The TE207P is a 32-bit 33MHz card keyed for 5.0 volt operation.

TOP

Product Applications Scenarios

IPBX

Internet Telephony Service Provider Network for Residential Users

ISP Voice Services

Digital Gateway and Protocol conversion with Asterisk SIP <-> H323

Downloads

Wildcard TE207P Product Sheet 181 KB

Octasic Echo Cancellation module Data Sheet 608 KB